Shop

BlueCast X5 LCD/DLP

119.00

BlueCast X5 for LCD/DLP

Castable: YES – Castability: Excellent

Compatible with: all LCD printers like Wanaho D7, Anycubic 3d, ZORTRAX, Prusa, Phrozen, Micromake L2, X-Cube, Xayav V etc. (405 nm with 30 watt led or higher power)

Washing mode: Ethyl / IPA alcohol 30 seconds _ Drying with compressed air

UV care: Not needed

Shrinkage: Minimum

Color: Light Blue

Primercat: Suggested

Size: 500 gr

Categories: ,

– Custom syntetized oligomer by BlueCast, not available to market, patent is going to be applied.

– Excellent casting of small engravings both positive and negative

– Fits all jewelry needs from filigree to medals as well dental one

– Excellent for stones presetting

– Curing triggering tuned to maximize antialias smoothing

– No monomer inside, no smell

– No aggression on plastic parts (tested on PS, PMMA)

– No postcuring needed for casting

– No shrinkage

– Easy welding with wax, forget about pattern lost into investment

– Can be polished, engraved, drilled (postcure is needed)

– Low viscosity, easier to recover uncured resin from models, easy to wash

– No preheating required

– Very little hygroscopic while liquid, no water absorption while printed

– Atoxic, solvent free, very low phospine content, very low skin irritant

– Cleaner burnout, 0,00% ash residual

– Suitable for fast burnout

– Full burnout also at lower temperature (750 C°)

– No expansion during burnout, sublimation starts at 130 Celsius

– Excellent dimensional stability in time, no need to stock in cold/dark places